hx4700 WindowsMobile6
Step 1: Make a new folder in the root folder of your harddisk drive. make sure it has no spaces.
e.g. C:\BootLoader\
don't use something like C:\Boot Loader\ as it contains spaces.
NOTE: Having spaces in the folder containing the rom file will cause an error to show because it can't send the file to the device.*
Step 2: Download the WM6 rom and my bootloader into the folder you just created in step one.
Rom: WM6_4700_0_7_0_RELEASE4.rar
BootLoader: BootLoader.exe.
NOTE: Don't download them into another folder that has spaces, put them in the folder from step one.*
Step 3: Put your hx4700 in bootloader mode by pressing ITASK+CONTACTS+RESET, And put it in the sync cradle.
NOTE: It's best to charge your iPAQ or have power connected before you perform the rom upgrade.*
Step 4: Open the BootLoader.exe from the folder, and select the 'WM6_4700_0_7_0_FIXED.rar' file when it asks you to select a rom file.
It will automatically find and extract the nbf file, remove the header, close activesync, then start uploading it to your device.
NOTE: You may need to put on a pot of coffee, it takes a while. It will show an error after uploading it, and stay in bootloader mode, but it will still work once you apply step 5.
Step 5: Lastly, perform a clean reset by pressing CONTACTS + INBOX + RESET. When asked to confirm the clean reset press CALENDER.
NOTE: You may need to soft reset before or after doing this. This step is required by all bootloaders. (Solnyshok’s mod etc.) Don't skip it or it will not boot up.
Note: If using Windows Vista, You will need to install special drivers. A dialog box will prompt you to install them automatically if it detects you are running vista.
